Ensure Success With Updated Verified C_IBP_2208 Exam Dumps [2022]
Exam Materials for You to Prepare & Pass C_IBP_2208 Exam.
SAP C_IBP_2208 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION 43
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Holding Cost Percentage
- B. Target Service Level
- C. Minimum Lot Size
- D. Transportation Lead Time Error CV
Answer: B,C
NEW QUESTION 44
You are invited to review a problem with a customer's SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.
- A. Number of analytics charts displaying key figures' values
- B. Number of local members and complexity of calculations
- C. Excessive SAP IBP formatting in the Microsoft Excel UI
- D. Complex calculation graphs for key figures
Answer: C,D
NEW QUESTION 45
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.
- A. Use the Data Integration app to load suitable data that creates the combinations
- B. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
- C. Use the Check Mode operator to create the combinations
- D. Use the Manage Master Data app to create the combinations
Answer: A,D
NEW QUESTION 46
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.
- A. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
- B. Splitting the values from detailed to aggregated level by using a copy operator
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level, based on the time profile attribute
Answer: A,C
NEW QUESTION 47
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Avoid using telescopic time buckets.
- B. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
- C. Keep the number of fairshare segments small.
- D. Split into multiple planning areas to support weekly vs. daily planning needs.
- E. Increase the use of incremental lot size beyond the frozen horizon.
Answer: A,B,D
NEW QUESTION 48
What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.
- A. Used when you have more than three inputs at different planning levels in one calculation
- B. Used at any level of calculation level except the Request Level
- C. Used to break down a large calculation into manageable subcalculations
- D. Used by end-users in planning views to help visualize cross-period calculations
Answer: A,C
NEW QUESTION 49
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes? Note: There are 2 correct answers to this question.
- A. Decoupling Points determination in SAP IBP for demand-driven replenishment
- B. Charts creation in SAP Supply Chain Control Tower
- C. Demand Sensing with Gradient Boosting (Full)
- D. Supply Heuristics in SAP IBP for sales and operations
Answer: C,D
NEW QUESTION 50
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?
- A. IF("PERIODID3" ="$$PERIODID3CU$$...)
- B. IF("PERIODID4" ="$$PERIODID4CU$$...)
- C. IF("PERIODID2" ="$$PERIODID2CU$$...)
- D. IF("PERIODID5" ="$$PERIODID5CU$$...)
Answer: B
NEW QUESTION 51
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.
- A. SOURCECUSTGROUP
- B. SOURCELOCATION
- C. SOURCECUSTOMER
- D. SOURCEPRODUCTION
Answer: B,C
NEW QUESTION 52
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.
- A. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- B. These filters can be used together with attribute totals in the same planning view.
- C. You can add (or delete) planning objects to a planning view after these filters are applied.
- D. These filters are always applied based on the values stored in the database.
- E. You can only apply one value-based filter per planning view.
Answer: A,D,E
NEW QUESTION 53
How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.
- A. Simulate demand sensing inputs for Supply Review
- B. Model inventory turns based on Target Safety stocks
- C. Simulate heuristics run in Supply Review stage
- D. Simulate statistical forecast at the Demand Review stage
Answer: C,D
NEW QUESTION 54
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Periods are identified by an integer and profiles by an alphanumeric prefix.
- B. Both periods and profiles have start and end dates.
- C. Periods are identified by an alphanumeric prefix and profiles by an integer.
- D. Both periods and profiles are identified by a unique integer.
Answer: A,C
NEW QUESTION 55
For which of the following application jobs can you enter planning filters as parameters?Note: There are 2 correct answers to this question.
- A. Create Time Periods for Time Profiles
- B. Purge Non-Conforming Data
- C. Purge Master Data
- D. Purge Key Figure Data
Answer: C,D
NEW QUESTION 56
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Embedded, on-the-fly demand analytics
- B. Detailed statistical analysis of demand data using predictive analytics tools
- C. Consideration of demand-driven analysis for buffer positioning.
- D. Demand sensing of demand data using predictive analytics tools
Answer: A,B
NEW QUESTION 57
You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.
- A. Calculating the value of inventory on any time profile level ensuring flexibility of calculation
- B. Search for and return the last not null value of the inventory key figure
- C. Calculating how many periods inventory is going to last based on the planned demand
- D. Calculating the value of inventory on a weekly basis, using static aggregation from the daily level
Answer: B,C
NEW QUESTION 58
You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?
- A. A time profile has to be activated so that the application job can proceed.
- B. This application job can be run for multiple time profiles at once.
- C. The assigned Planning Area must be active.
- D. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.
Answer: D
NEW QUESTION 59
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.
- A. A forecast metric key figure, such FCSTMAPE
- B. A special key figure marked as an aggregate key figure (aggregate constraint)
- C. A unit of measure key figure, such as UOMCONVERSIONFACTOR
- D. A currency conversion key figure, such as exchange rate
Answer: B,C
NEW QUESTION 60
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.
- A. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- B. Jobs in the Applications Jobs app
- C. Supply chain graph in Supply Chain Network app
- D. Planning view templates in the SAP IBP add-in for Microsoft Excel
Answer: B,D
NEW QUESTION 61
SAP IBP ensures interoperability with which applications?Note: There are 2 correct answers to this question.
- A. Salesforce Sales Cloud
- B. User management in SAP Success Factors
- C. Business Network in SAP Ariba
- D. Financial Planning in SAP Analytics Cloud
Answer: C,D
NEW QUESTION 62
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.
- A. Rename the charts.
- B. Display all assigned analytics on a single UI.
- C. Link two analytics charts.
- D. Use drill-down functionality.
- E. Add process templates.
Answer: B,D,E
NEW QUESTION 63
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?
- A. Configuration items should be bundled in the collections based on the SAP IBP project stream.
- B. A planning area with its time profile must be bundled in one collection.
- C. You should delete collections after they have been transported.
- D. A planning area with the copy operators assigned must be bundled in one collection.
Answer: B,D
NEW QUESTION 64
Analytics charts are created by the user in the Advanced Analytics application.What can the user do in the Advanced Analytics app?Note: There are 2 correct answers to this question.
- A. Group data.
- B. Apply filters on your data.
- C. Merge charts together.
- D. Open graphics in Excel.
Answer: A,B
NEW QUESTION 65
......
Updated C_IBP_2208 Certification Exam Sample Questions: https://examcollection.dumpsvalid.com/C_IBP_2208-brain-dumps.html