Mar-2023 Juniper JN0-231 Actual Questions and 100% Cover Real Exam Questions
JN0-231 Free Exam Questions and Answers PDF Updated on Mar-2023
What are the steps to follow for the registration for the Juniper JN0-231 Exam
The first step is to visit the official website of Juniper.
Then, you need to click on the “JNCIA-SEC Exam” link and then click on “Register Now” button.
After that, you have to fill up the form with all your details like name, email address, phone number, etc.
Then, you have to pay the exam fee through credit card or PayPal account. You can also opt for other payment options like cash in person at test centers or by check.
After that, you need to enter your payment details and click on “Register now” button.
NEW QUESTION 51
You are assigned a project to configure SRX Series devices to allow connections to your webservers. The webservers have a private IP address, and the packets must use NAT to be accessible from the Internet. The webservers must use the same address for both connections from the Internet and communication with update servers.
Which NAT type must be used to complete this project?
- A. hairpin NAT
- B. destination NAT
- C. static NAT
- D. source NAT
Answer: C
Explanation:
Only static NAT with pool ensures both traffic initiated from inside and outside networks use the same IP address.
NEW QUESTION 52
When transit traffic matches a security policy, which three actions are available? (Choose three.)
- A. Permit
- B. Discard
- C. Allow
- D. Reject
- E. Deny
Answer: A,D,E
NEW QUESTION 53
Click the Exhibit button.
Referring to the exhibit, which two statements are correct about the ping command? (Choose two.)
- A. The 10.10.102.10 IP address is the source.
- B. The DMZ routing-instance is the source.
- C. The DMZ routing-instance is the destination.
- D. The 10.10.102.10 IP address is the destination.
Answer: B,D
NEW QUESTION 54
Which two statements are true about UTM on an SRX340? (Choose two.)
- A. No default profile is created.
- B. No default UTM policy is created
- C. A default UTM policy is created.
- D. A default UTM profile is created
Answer: A,B
NEW QUESTION 55
What are the valid actions for a source NAT rule in J-Web? (choose three.)
- A. On
- B. Off
- C. Source
- D. Pool
- E. interface
Answer: B,D,E
NEW QUESTION 56
What is a type of security feed that Sky ATP provides to a vSRX series device by default?
- A. Malware feeds
- B. RSS feeds
- C. C&C feeds
- D. ACL feeds
Answer: C
NEW QUESTION 57
What must you do first to use the Monitor/Events workspace in the j-Web interface?
- A. You must enable security logging that uses the SD-Syslog format.
- B. You must enable stream mode security logging on the SRX Series device
- C. You must enable security logging that uses the TLS transport mode.
- D. You must enable event mode security logging on the SRX Series device.
Answer: D
NEW QUESTION 58
You want to provide remote access to an internal development environment for 10 remote developers.
Which two components are required to implement Juniper Secure Connect to satisfy this requirement?
(Choose two.)
- A. Marvis virtual network assistant
- B. an additional license for an SRX Series device
- C. Juniper Secure Connect client software
- D. an SRX Series device with an SPC3 services card
Answer: B,C
NEW QUESTION 59
What is the purpose of the Shadow Policies workspace in J-Web?
- A. The Shadow Policies workspace shows used IPS policies due to policy overlap
- B. The Shadow Policies workspace shows unused IPS policies due to policy overlap.
- C. The Shadow Policies workspace shows unused security policies due to policy overlap.
- D. The Shadow Policies workspace shows used security policies due to policy overlap
Answer: C
NEW QUESTION 60
Which management software supports metadata-based security policies that are ideal for cloud deployments?
- A. Sky Enterprise
- B. Security Director
- C. J-Web
- D. Network Director
Answer: B
NEW QUESTION 61
You are asked to verify that a license for AppSecure is installed on an SRX Series device.
In this scenario, which command will provide you with the required information?
- A. user@srx> show configuration system
- B. user@srx> show chassis firmware
- C. user@srx> show services accounting
- D. user@srx> show system license
Answer: D
NEW QUESTION 62
Which statements is correct about global security policies?
- A. Global policies eliminate the need to assign interface to security zones.
- B. Global policies allow you to regulate traffic with addresses and applications, regardless of their security zones.
- C. Global security require you to identify a source and destination zone.
- D. Traffic matching global is not added to the session table.
Answer: B
NEW QUESTION 63
Which type of NAT is performed by the SRX Series device?
- A. Source NAT with PAT
- B. Destination NAT with PAT
- C. Destination NAT without PAT
- D. Source Nat without PAT
Answer: B
NEW QUESTION 64
Which Juniper Networks solution uses static and dynamic analysis to search for day-zero malware threats?
- A. Juniper ATP Cloud
- B. IPS
- C. firewall filters
- D. UTM
Answer: A
Explanation:
Malware Sandboxing
Detect and stop zero-day and commodity malware within web, email, data center, and application traffic targeted for Windows, Mac, and IoT devices. https://www.juniper.net/us/en/products/security/advanced-threat-prevention.html
NEW QUESTION 65
Which two traffic types are considered exception traffic and require some form of special handling by the PFE? (Choose two.)
- A. HTTP sessions
- B. SSH sessions
- C. ICMP reply messages
- D. traceroute packets
Answer: C,D
NEW QUESTION 66
Which statement about NAT is correct?
- A. Static NAT is processed after forwarding lookup.
- B. Static NAT takes precedence over destination NAT.
- C. Destination NAT takes precedence over static NAT.
- D. Source NAT is processed before security policy lookup.
Answer: B
NEW QUESTION 67
Which two statements about security policy processing on SRX series devices are true? (choose two)
- A. Zone-Based security policies are processed after global policies
- B. Traffic matching a global policy cannot be processed against a firewall filter
- C. Traffic matching a zone-based policy is not processed against global polices.
- D. Zone-Based security policies are processed before global policies.
Answer: A,D
NEW QUESTION 68
Which two components are configured for host inbound traffic? (Choose two.)
- A. logical interface
- B. routing instance
- C. physical interface
- D. zone
Answer: A,D
NEW QUESTION 69
The free licensing model for Sky ATP includes which features? (Choose two.)
- A. C & C feeds
- B. Compromised endpoint dashboard
- C. Infected host blocking
- D. Executable file inspection
Answer: C,D
NEW QUESTION 70
......
Juniper JN0-231 Real 2023 Braindumps Mock Exam Dumps: https://examcollection.dumpsvalid.com/JN0-231-brain-dumps.html