Latest [Feb 20, 2022] 100% Passing Guarantee - Brilliant HPE0-V14 Exam Questions PDF
HPE0-V14 Certification – Valid Exam Dumps Questions Study Guide! (Updated 290 Questions)
NEW QUESTION 157
Match each customer data center architecture to its network topology.
Answer:
Explanation:
NEW QUESTION 158
Match each ProLiant solution to its ideal use case
Answer:
Explanation:
4 , 3 , 2 , 1
NEW QUESTION 159
Why is SNMPv2c considered to be insecure?
- A. SNMPv2c agents only accept GET requests which match their read-only community string
- B. SNMPv2c agents only encrypt WRITE messages.
- C. SNMPv2c only allows the signing of the message payload
- D. SNMPv2c community strings are transmitted in clear text
Answer: D
NEW QUESTION 160
HPE support asks you to provide the Active Health System log from HPE StoreEasy 1660 Storage to expedite a troubleshooting process.
Which procedures will generate the AHS log for HPE Support? (Choose two.)
- A. Download the AHS log from Server Manager dashboard
- B. Download the AHS log from Federation dashboard in StoreEasy Management Console
- C. Log in to the StoreEasy system with SSH and use the hpessacli command
- D. Boot to Intelligent Provisioning and download the AHS log from maintenance section
- E. Configure Remote Support on the iLO to send the log to HPE
Answer: D,E
NEW QUESTION 161
A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?
- A. HPE Apollo 2000 Server
- B. HPE ML110 Gen10
- C. HPE Synergy Solution
- D. HPE ML350 Gen10
Answer: D
Explanation:
Reference: https://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA0-8758ENW.pdf
NEW QUESTION 162
A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center.
Which HPE resource should you use to provide this information?
- A. One Config Simple (OCS)
- B. Storage Size
- C. One Config Advance (OCA)
- D. Single Point of Connectivity Knowledge (SPOCK)
Answer: D
NEW QUESTION 163
Match each adapter to its characteristic.
Answer:
Explanation:
NEW QUESTION 164
You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.)
- A. all cooling fans
- B. all expansion boards
- C. redundant processors
- D. CMOS battery
- E. all external storage media
Answer: C,E
NEW QUESTION 165
You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.
Answer:
Explanation:
1 - Add the desired physical interfaces to the link-aggregation group
2 - Configure the bridge-aggregation interface with the desired VLANs within the bridge-aggregation interface.
3 - Set the link-aggregation mode within the bridge-aggregation interface.
4 - Create the bridge-aggregation interface
NEW QUESTION 166
A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
* Support for Multi Chassis Link Aggregation in an active-active mode.
* The control plane must not be a single point of failure.
* Rapid Fail-over. Unified Management.
* They require a maximum of two switches per stack.
Which stacking technology meets the customer's requirements?
- A. Aruba Virtual Switching Extension (VSX)
- B. HPE Distributed Trunking
- C. HPE Intelligent Resilient Framework (IRF)
- D. Aruba Virtual Switching Framework (VSF)
Answer: A
Explanation:
Reference: https://www.arubanetworks.com/assets/tg/AVD_Midsize-Campus-Design-Deploy.pdf
NEW QUESTION 167
A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space.
Which HPE product should you recommend to the customer?
- A. SimpliVity
- B. StoreOnce
- C. MSA storage
- D. StoreEasy
Answer: D
NEW QUESTION 168
You plan to perform maintenance on several systems in a rack. You need to ensure that the rack does not tip when you are working on the equipment.
What should you use?
- A. lockable casters
- B. adjustable depth frame
- C. leveling feet
- D. stabilizer kit
Answer: D
NEW QUESTION 169
A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.
Answer:
Explanation:
NEW QUESTION 170
What is a benefit of a NAS device?
- A. dedicated file services
- B. iSCSl Protocol services
- C. SAS connectivity to hosts
- D. shared Block Level access
Answer: D
NEW QUESTION 171
What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?
- A. NAS Target
- B. Virtual Tape Library
- C. Recovery Manager Central
- D. Catalyst Target
Answer: C
NEW QUESTION 172
Refer to the exhibits.
A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)
- A. 24 LFF drives
- B. 12 SFF drives
- C. 24 SFF drives
- D. 48 SFF drives
- E. 12 LFF drives
Answer: B,C
NEW QUESTION 173
A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.
Which feature of HPE Gen10 servers offers these benefits?
- A. workload profile matching
- B. core boosting
- C. agentless management
- D. jitter smoothing
Answer: B
NEW QUESTION 174
An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.
- A. HPE ProLiant Support Pack
- B. HPE iLO Amplifier Pack
- C. HPE Smart Update Manager
- D. HPE OneView Standard
Answer: B
NEW QUESTION 175
Refer to the exhibit.
A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?
- A. SSD Drives
- B. Secondary Riser Kit
- C. Smart Storage Hybrid Capacitor
- D. Workload Accelerator
Answer: D
NEW QUESTION 176
Which series of internal checks will an HPE ProLiant server use to validate that the base hardware components are working correctly before booting the operating system?
- A. EDO
- B. POST
- C. CMOS
- D. BIOS
Answer: D
NEW QUESTION 177
A customer wants an HPE solution to expand a Big Data platform. The company is outgrowing its current setup and expects to consume 1 PB of data in a few months and up to 2 PB of data within a year.
Which HPE server platform is best suited for this use case?
- A. HPE Apollo
- B. HPE Microserver
- C. HPE Proliant ML
- D. HPE Edgeline
Answer: A
NEW QUESTION 178
You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q
16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit Two SN3000B FC Switches Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?
- A. HPE NinjaSTARS
- B. HPE OneView Advanced
- C. HPE SPOCK
- D. HPE One Configuration Advanced
Answer: C
NEW QUESTION 179
You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array.
What should you explain to this customer?
- A. Using drives with different capacities in a single array increases the chance of disk failure
- B. The RAID level will be set at RAID 0 automatically
- C. The extra capacity of the larger drives will not be utilized
- D. The process to create the array will fail, and the server will not boot
Answer: C
NEW QUESTION 180
Drag the correct protocols from the left to their appropriate area on the topology.
Answer:
Explanation:
Explanation
1-FC
2-FC
3-TCP/IP
NEW QUESTION 181
......
Who should take the HP HPE0-V14: Building HPE Hybrid IT Solutions Exam
Individuals should pursue the HPE0-V14 exam test if they want to demonstrate their expertise and ability to access and manage data to perform queries and analyses from HP HPE0-V14: Building HPE Hybrid IT Solutions Certification.
- Analysts
- HPE channel partners and HPE sales professionals
- Programmers
- Or anyone writing & interested in SAS programs
- Data managers
HPE0-V14 are Available for Instant Access: https://examcollection.dumpsvalid.com/HPE0-V14-brain-dumps.html