Guaranteed Accomplishment with Newest Nov-2024 FREE Fortinet NSE7_OTS-7.2
Use Valid New Free NSE7_OTS-7.2 Exam Dumps & Answers
The Fortinet NSE7_OTS-7.2 exam covers a wide range of topics related to OT security, including threat detection and mitigation, network segmentation, access control, and incident response. Candidates will need to have a solid understanding of network architecture, protocols, and security concepts. They will also need to be familiar with industrial automation systems, including programmable logic controllers (PLCs), human-machine interfaces (HMIs), and distributed control systems (DCS).
NEW QUESTION # 25
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network. Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You must set correct operator in event handler to trigger an event.
- B. You can automate SOC tasks through playbooks.
- C. Each playbook can include multiple triggers.
- D. You cannot use Windows and Linux hosts security events with FortiSoC.
Answer: A,B
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 26
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use a FortiAuthenticator.
- B. You must register the same FortiToken on more than one FortiGate.
- C. You must use the user self-registration server.
- D. You must use a third-party RADIUS OTP server.
Answer: A
NEW QUESTION # 27
Refer to the exhibit
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
- A. An administrator can create firewall policies in the switch to secure between PLCs.
- B. There is no micro-segmentation in this topology.
- C. PLCs use IEEE802.1Q protocol to communicate each other.
- D. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
Answer: B
NEW QUESTION # 28
Which three Fortinet products can you use for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiManager
- B. FortiAnalyzer
- C. FortiNAC
- D. FortiSIEM
- E. FortiGate
Answer: C,D,E
NEW QUESTION # 29
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong hcache table for the report.
- B. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- C. The administrator selected the wrong time period for the report.
- D. The administrator selected the wrong devices in the Devices section.
Answer: C,D
Explanation:
Explanation
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/32cb817d-a307-11eb-b70b-0050569258
NEW QUESTION # 30
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong hcache table for the report.
- B. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- C. The administrator selected the wrong time period for the report.
- D. The administrator selected the wrong devices in the Devices section.
Answer: C,D
Explanation:
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/32cb817d-a307-11eb-b70b-0050569258
NEW QUESTION # 31
Which three protocols are used as industrial Ethernet protocols? (Choose three.)
- A. EtherNet/IP
- B. RJ45
- C. PROFINET
- D. EtherCAT
- E. M12
Answer: A,C,D
NEW QUESTION # 32
The OT network analyst runs different level of reports to quickly explore threats that exploit the network. Such reports can be run on all routers, switches, and firewalls. Which FortiSIEM reporting method helps to identify these type of exploits of image firmware files?
- A. CMDB reports
- B. Compliance reports
- C. Threat hunting reports
- D. OT/loT reports
Answer: C
NEW QUESTION # 33
Refer to the exhibit.
The IPS profile is added on all of the security policies on FortiGate.
For an OT network, which statement of the IPS profile is true?
- A. The IPS profile inspects only traffic originating from SCADA equipment.
- B. All IPS signatures are overridden and must block traffic match signature patterns.
- C. The listed IPS signatures are classified as SCADAapphcat nns
- D. FortiGate has no IPS industrial signature database enabled.
Answer: C
NEW QUESTION # 34
Refer to the exhibit.
An operational technology rule is created and successfully activated to monitor the Modbus protocol on FortiSIEM. However, the rule does not trigger incidents despite Modbus traffic and application logs being received correctly by FortiSIEM.
Which statement correctly describes the issue on the rule configuration?
- A. The attributes in the Group By section must match the ones in Fitters section.
- B. The Aggregate attribute COUNT expression is incompatible with the filters.
- C. The SubPattern is missing the filter to match the Modbus protocol.
- D. The first condition on the SubPattern filter must use the OR logical operator.
Answer: A
NEW QUESTION # 35
Refer to the exhibit. An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. The FortiGate devices is in offline IDS mode.
- B. The FortiGate-Edge device must be in NAT mode.
- C. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- D. Port5 is not a member of the software switch.
Answer: B,C
NEW QUESTION # 36
An OT supervisor needs to protect their network by implementing security with an industrial signature database on the FortiGate device.
Which statement about the industrial signature database on FortiGate is true?
- A. A supervisor can enable it through the FortiGate CLI.
- B. By default, the industrial database is enabled.
- C. An administrator must create their own database using custom signatures.
- D. A supervisor must purchase an industrial signature database and import it to the FortiGate.
Answer: A
NEW QUESTION # 37
Refer to the exhibit.
You are assigned to implement a remote authentication server in the OT network.
Which part of the hierarchy should the authentication server be part of?
- A. Core
- B. Edge
- C. Access
- D. Cloud
Answer: B
NEW QUESTION # 38
Refer to the exhibit. An operational technology rule is created and successfully activated to monitor the Modbus protocol on FortiSIEM. However, the rule does not trigger incidents despite Modbus traffic and application logs being received correctly by FortiSIEM.
Which statement correctly describes the issue on the rule configuration?
- A. The attributes in the Group By section must match the ones in Fitters section.
- B. The Aggregate attribute COUNT expression is incompatible with the filters.
- C. The SubPattern is missing the filter to match the Modbus protocol.
- D. The first condition on the SubPattern filter must use the OR logical operator.
Answer: A
NEW QUESTION # 39
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication. What should the OT supervisor do to achieve this on FortiGate?
- A. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- B. Enable two-factor authentication with FSSO.
- C. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- D. Under config user settings configure set auth-on-demand implicit.
Answer: A
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 40
Refer to the exhibit. The IPS profile is added on all of the security policies on FortiGate. For an OT network, which statement of the IPS profile is true?
- A. The IPS profile inspects only traffic originating from SCADA equipment.
- B. All IPS signatures are overridden and must block traffic match signature patterns.
- C. The listed IPS signatures are classified as SCADAapphcat nns
- D. FortiGate has no IPS industrial signature database enabled.
Answer: C
NEW QUESTION # 41
......
NSE7_OTS-7.2 Braindumps PDF, Fortinet NSE7_OTS-7.2 Exam Cram: https://examcollection.dumpsvalid.com/NSE7_OTS-7.2-brain-dumps.html