Download Free SAP C-IBP-2111 Real Exam Questions Download
Latest SAP C-IBP-2111 Real Exam Dumps PDF
NEW QUESTION 43
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Lead time variability
- B. Reorder point
- C. Lot sizes
- D. Target inventory level
Answer: B,C
NEW QUESTION 44
For which of the following application jobs can you enter planning filters as parameters? Note: There are
2 correct Answers to this question.
- A. Create Time Periods for Time Profiles
- B. Purge Non-Conforming Data
- C. Purge Key Figure Data
- D. Purge Master Data
Answer: C,D
NEW QUESTION 45
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by an alphanumeric prefix and profiles by an integer.
- B. Both periods and profiles are identified by an integer.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Periods are identified by a start and end date and profiles by an integer.
Answer: D
NEW QUESTION 46
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Display all assigned analytics on a single UI.
- B. Organize charts.
- C. Link two analytics charts.
- D. Add process templates.
- E. Rename the charts.
Answer: A,B,D
NEW QUESTION 47
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Identify inventory items that require closer attention.
- B. Assign more appropriate inventory algorithms to planning objects.
- C. Analyze forecast accuracy by product class.
- D. Tailor your forecast strategy and inventory optimization to segment characteristics.
Answer: C,D
NEW QUESTION 48
What type of key figure requires a planning level to have all attributes as roots?
- A. The attribute transformation key figure, such as PERIODID1
- B. The conversion key figure, such as exchange rate
- C. The special key figure marked as an aggregate key figure
- D. The time independent key figure, such as FCSTMAPE
Answer: C
NEW QUESTION 49
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.
- A. Rough-cut supply planning
- B. Executive review
- C. Consensus demand planning
- D. Finite resource capacities planning
- E. Demand-driven materials requirement planning
Answer: A,B,C
NEW QUESTION 50
What options for copying will be available to you? Note: There are 2 correct Answers to this question.
- A. Creation of a partial copy with a new ID along with the time profile and required master data types
- B. Creation of an exact copy with a new ID along with the time profile and master data types
- C. Creation of a partial copy with a new ID along with the time profile and all master data objects
- D. Creation of an exact copy with a new ID, with the time profile and master data types shared with the source
Answer: A,C
NEW QUESTION 51
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note:
There are 3 correct Answers to this question.
- A. You can only apply one value-based filter per planning view.
- B. These filters can be used together with attribute totals in the same planning view.
- C. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- D. These filters are always applied based on the values stored in the database.
- E. You can add (or delete) planning objects to a planning view after these filters are applied.
Answer: A,C,D
NEW QUESTION 52
NO.23 You are redesigning planning for supply chain that is facing the issue of variability. What is the best solution for dampening variability via demand classification?
- A. SAP IBP for Demand
- B. SAP IBP for Inventory
- C. SAP IBP for Sales and Operations Planning
- D. SAP IBP for Demand Driven Replenishment
Answer: B
NEW QUESTION 53
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: There are 3 correct Answers to this question.
- A. You can only apply one value-based filter per planning view.
- B. These filters can be used together with attribute totals in the same planning view.
- C. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- D. These filters are always applied based on the values stored in the database.
- E. You can add (or delete) planning objects to a planning view after these filters are applied.
Answer: A,C,D
NEW QUESTION 54
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Data input review for inventory
- B. Demand-supply balancing
- C. Demand sensing stage
- D. Demand review
Answer: B,D
NEW QUESTION 55
Analytics charts are created by the user in the Advanced Analytics application. What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question.
- A. Group data.
- B. Apply filters on your data.
- C. Merge charts together.
- D. Open graphics in Excel.
Answer: A,B
NEW QUESTION 56
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. Select Protect Active Worksheet in the About section of SAP IBP tab
- B. IBP -> Lock Selected cells in IBP Formatting Sheet tab
- C. By restricting data input in the Key Figure Configuration app
- D. IBP -> Data Validation in IBP Formatting Sheet tab
Answer: C
NEW QUESTION 57
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.
- A. Splitting the values from detailed to aggregated level by using copy operator
- B. Splitting the values from aggregated to detailed level based on time profile attribute
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level based on stored split-factor key figure
Answer: C,D
NEW QUESTION 58
You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question.
- A. If a realignment step fails, subsequent steps are not processed.
- B. The name of the realignment step should be no longer than 20 characters.
- C. The number of steps in realignment run is limited to 255.
- D. The realignment step status must be set to In Review for it to be executed.
Answer: A,D
NEW QUESTION 59
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process? Note: There are 2 correct Answers to this question.
- A. You can export from a planning area that is on a different release.
- B. You can choose to import only some of the items that were exported.
- C. You can move a transported item from one collection to another.
- D. You can create a collection of items and export it.
Answer: A,C
NEW QUESTION 60
You create an S&OP operator for heuristics on an SAP IBP project. What must you enable for the S&OP operator that is specifically relevant for subnetworks?
- A. Supply propagation
- B. Balance Receipts parameter
- C. Compute Expected Supply parameter
- D. Normalize Quotas parameter
Answer: C
NEW QUESTION 61
How can you check if key figure is editable or non-editable?
- A. Using the Analytics Advanced app when selecting key figures
- B. Using the Web-based Planning app when selecting key figures
- C. Using the Edit View and then the Edit Planning View option
- D. Using the Key Figure Calculations app
Answer: B
NEW QUESTION 62
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Capacity leveling will be possible for production and storage resources.
- B. Enough demands can be pulled forward and pull production will occur.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
Answer: B,D
NEW QUESTION 63
You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.
- A. Key figures can be calculated across different planning levels.
- B. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- C. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
- D. The calculation chain for a key figure must always result in a calculated key figure.
Answer: A,C
NEW QUESTION 64
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP. What is mandatory to create in your planning area for the setup of reference product(s) to work?
Note: There are 2 correct Answers to this question.
- A. Planning objects for the new product
- B. Definition of an attribute representing the product ID
- C. Definition of an attribute representing the product description
- D. Definition of Actual Sales business meaning for one key figure
Answer: A,B
NEW QUESTION 65
A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?
- A. IF("PERIODID5" ="$$PERIODID5CU$$...)
- B. IF("PERIODID4" = "SSPERIODID4CU$$...)
- C. IF("PERIODID2" ="$$PERIODID2CU$$...)
- D. IF("PERIODID3" ="$$PERIODID3CUSS...)
Answer: B
NEW QUESTION 66
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check? Note:
There are 2 correct Answers to this question.
- A. Change the description of the attributes in the time profile.
- B. Add a new time profile level to the time profile.
- C. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
- D. Change the past and future horizon of the levels in the time profile.
Answer: A,D
NEW QUESTION 67
......
PDF (New 2022) Actual SAP C-IBP-2111 Exam Questions: https://examcollection.dumpsvalid.com/C-IBP-2111-brain-dumps.html