Cisco 300-435 Real Exam Questions Guaranteed Updated Dump from DumpsValid
Verified Pass 300-435 Exam in First Attempt Guaranteed
Conclusion
With the Cisco 300-435 exam, everyone intending to specialize in skills that touch on programming and automating networks cannot go wrong. The ultimate prize is holding a certificate that displays your resilience and achievements. Since ample learning opportunities by way of study guides and courses are there, the chances of reaching the peak of one’s career are high. Keep working on your potential to find your footing in the bankable networking sphere.
NEW QUESTION 49
Which curl command is used to update the SNMP community of network ID "1234567" to read-only?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
Explanation:
PUT is used to update the snmp network ID. The access has to be community and not users. Therefore, option B is correct.
NEW QUESTION 50
What are two benefits of leveraging Ansible for automation of Cisco IOS XE Software? (Choose two.)
- A. It does not require any modules of software except SSH to be loaded on the network device.
- B. All IOS XE operating systems include Ansible playbooks for basic system administration tasks.
- C. It is a device-independent method for automation and can be used with any type of device or operating system.
- D. Ansible playbooks are packaged and installed on IOS XE devices for automatic execution when an IOS device reboots.
- E. Ansible playbooks can be written from the IOS XE EXEC command line to configure the device itself.
Answer: C,D
NEW QUESTION 51
Which two factors influence the location accuracy of a device using Scanning APIs? (Choose two.)
- A. amount of device antennas
- B. AP placement
- C. client device orientation
- D. battery life of the device
- E. device manufacturer/OS
Answer: B,C
Explanation:
Section: Cisco Meraki
Explanation:
The geo-location coordinates (latitude, longitude) and X,Y location data accuracy can vary based on a number of factors and should be considered a best effort estimate. AP placement, environmental conditions, and client device orientation can influence X,Y estimation; experimentation can help improve the accuracy of results or determine a maximum acceptable uncertainty for data points.
Reference: https://developer.cisco.com/meraki/guides/location-services-solution-guide/
NEW QUESTION 52
An engineer needs to create a new network using the Meraki API. Which HTTP action to the URL https:// api.meraki.com/api/v0/organizations/<new_org_id>/networks will result in a 201 response code?
- A. PUT
- B. ADD
- C. GET
- D. POST
Answer: D
Explanation:
Reference:
https://httpstatuses.com/201
NEW QUESTION 53
What are two characteristics of RPC API calls? (Choose two.)
- A. They can be used only on network devices.
- B. They call a single function or service.
- C. Parameters can be passed to the calls.
- D. They use only UDP for communications.
- E. They must use SSL/TLS.
Answer: B,C
NEW QUESTION 54
What is a capability of Cisco SD-WAN vManage Certificate Management API?
- A. generates SSL certificates
- B. deletes existing installed certificates
- C. creates certificate signing requests
- D. distributes the root certificate to client devices
Answer: C
NEW QUESTION 55
Drag and drop the commands to the Ansible playbook that applies configuration to an interface on a Cisco IOS XE device. Not all options are used.
Answer:
Explanation:
NEW QUESTION 56
Which statement describe the difference between OpenConfig and native YANG data models?
- A. Native models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
- B. Native models are designed to be independent of the underlying platform and are developed by vendors and standards bodies, such as the IETF.
- C. OpenConfig models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
- D. Native models are developed by individual developers and designed to apply configurations on platforms.
Answer: B
Explanation:
Section: Automate APIs and Protocols
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white- paper-c11-741518.html
NEW QUESTION 57 
Refer to the exhibit. The task is to create a Python script to display an alert message when a Meraki MX Security Appliance goes down. The exhibit shows sample data that is received. Which Python snippet displays the device name and the time at which the switch went down?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Network Programmability Foundation
NEW QUESTION 58
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96- 143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.
Answer:
Explanation:
deviceId
NEW QUESTION 59
Which Python snippet receives a Meraki webhook request?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
Explanation:
Reference:
https://github.com/CiscoDevNet/dnav3-code/blob/master/intro-meraki/meraki-07-webhooks/webhookreceiver.py
https://github.com/CiscoDevNet/dnav3-code/blob/master/intro-meraki/meraki-07-webhooks/webhookreceiver.py
NEW QUESTION 60
Refer to the exhibit.
A Python script must be created to deactivate vSmart Policy Cisco SD-WAN vManage Configuration APIs.
The documentation states the URL is as shown in the exhibit for this REST call using POST, and that
"policyId" is a required request parameter. Which line of Python code makes this call, assuming the variable
"s" is a valid Requests session object and the variable "policy-id" is the policyId?
- A. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/%s' % policy_id)
- B. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate&policyId=%s' % policy_id)
- C. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/', data = {'policyId':
policy_id}) - D. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate?policyId=%s' % policy_id)
Answer: A
NEW QUESTION 61
Refer to the exhibit. What is the expected output from the Python code?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 62
Refer to the exhibits.
An engineer creates a Python scripts using ncclient to display interface information. The code must be completed so that it can be tested. Which expression completes the highlighted section in the format call?
- A. intf_info
- B. intf_config
- C. intf_config[0]
- D. intf_get
Answer: A
Explanation:
Explanation
The highlighted format cell for print is for the host.
NEW QUESTION 63
When a Grafana dashboard is built to receive network events from Cisco DNA Center, which integration bundle is enabled to send notifications?
- A. Network Events for REST API Endpoint
- B. DNA Center Rest API
- C. Network Issue Monitor and Enrichment for ITSM
- D. Basic ITSM CMDB Synchronization
Answer: B
Explanation:
Section: Cisco DNA Center
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and- management/dna-center/1-3/admin_guide/b_cisco_dna_center_admin_guide_1_3/ b_dnac_admin_guide_1_2_10_chapter_010.html
NEW QUESTION 64
Due to financial constraints, an engineer is forced to use WAN edge routers with limited memory. BGP is used to exchange routing information with external customers. Which two additional actions are taken in this design?
(Choose two.)
- A. Implement the Maximum-Prefix feature.
- B. Filter any BGP routes that were not originated in external customer AS.
- C. Utilize iBGP to reduce memory utilization.
- D. Permit only specific routes from the external customers.
- E. Allow any BGP route that has external customer AS in the AS path.
Answer: A,D
NEW QUESTION 65
What are two characteristics of RPC API calls? (Choose two.)
- A. They can be used only on network devices.
- B. Parameters can be passed to the calls.
- C. They use only UDP for communications.
- D. They call a single function or service.
- E. They must use SSL/TLS.
Answer: B,E
NEW QUESTION 66
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96-
143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.
Answer:
Explanation:
?deviceId=
NEW QUESTION 67
Refer to the exhibit.
An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?
- A. yang.data+json
- B. json
- C. yang +json
- D. yang-data+json
Answer: D
NEW QUESTION 68
Refer to the exhibit.
Which type of YANG container is described by the JSON instance provided?
- A. interface-configurations
- B. interface-name
- C. active
- D. description
Answer: A
NEW QUESTION 69
Refer to the exhibit.
A Python script has been created that calls the Cisco SD-WAN vManage Device Inventory API to get the list of vEdges. The JSON data that returns to a Python dictionary has been converted and assigned to a variable named "d". A portion of the JSON is shown in the exhibit. Which code will complete the expression hostname= to access the hostname?
- A. d["data"][0]["host-name"]
- B. d[data][0][host-name]
- C. d["host-name"]["data"]{"0"}
- D. d("data")[0]("host-name")
Answer: A
Explanation:
Explanation
The double-quotations are a necessary syntax of Python. And for the json portion doesnt use parentheses. It always uses brackets. d["data"][0]["host-name"] is the only logical answer.
NEW QUESTION 70
......
Download Real Cisco 300-435 Exam Dumps Test Engine Exam Questions: https://examcollection.dumpsvalid.com/300-435-brain-dumps.html