Check the Available NSE4_FGT-7.0 Exam Dumps with 174 QA's UPDATED 2022
Download NSE4_FGT-7.0 Exam Dumps Questions to get 100% Success in Fortinet
How much is the average salary of the Fortinet NSE4_FGT-7.0 Certified professional?
Evidently, the salary of the Fortinet NSE4_FGT-7.0 Certified professional is dependent on his/her domain expertise. For example, a network security expert who specializes in firewalls will get a much higher salary than a network security expert who specializes in web security. The pair of experts who have the same domain expertise and skills will get a higher salary than those who specialize in a particular area. Moreover, the salary of a person also depends on the company and region where he/she is working. The average salary of a person who got certified with the help of the NSE4_FGT-7.0 Dumps is as follows:
- In the United Kingdom: 55,000 GBP
- In the United States: 80,000 USD
- In India: 60,000 INR
- In Canada: 80,000 CAD
NEW QUESTION 36
When a firewall policy is created, which attribute is added to the policy to support recording logs to a FortiAnalyzer or a FortiManager and improves functionality when a FortiGate is integrated with these devices?
- A. Log ID
- B. Policy ID
- C. Universally Unique Identifier
- D. Sequence ID
Answer: C
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/554066/firewall-policies
"Universally Unique Identifier (UUID) attributes have been added to policies to improve functionality when working with FortiManager or FortiAnalyzer units"
NEW QUESTION 37
View the exhibit.
Which of the following statements are correct? (Choose two.)
- A. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the TunnelB VPN is down.
- B. This is a redundant IPsec setup.
- C. This setup requires at least two firewall policies with the action set to IPsec.
- D. Dead peer detection must be disabled to support this type of IPsec setup.
Answer: A,B
NEW QUESTION 38
Which of the following statements is true regarding SSL VPN settings for an SSL VPN portal?
- A. By default, the SSL VPN portal requires the installation of a client's certificate.
- B. By default, the admin GUI and SSL VPN portal use the same HTTPS port.
- C. By default, split tunneling is enabled.
- D. By default, FortiGate uses WINS servers to resolve names.
Answer: B
NEW QUESTION 39
Refer to the exhibit.
The exhibit contains a network interface configuration, firewall policies, and a CLI console configuration.
How will FortiGate handle user authentication for traffic that arrives on the LAN interface?
- A. Authentication is enforced at a policy level; all users will be prompted for authentication.
- B. Users from the Sales group will be prompted for authentication and can authenticate successfully with the correct credentials.
- C. If there is a full-through policy in place, users will not be prompted for authentication.
- D. Users from the HR group will be prompted for authentication and can authenticate successfully with the correct credentials.
Answer: A
NEW QUESTION 40
Refer to the exhibit.
The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address.
An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies.
The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form-based authentication scheme for the FortiGate local user database. Users will be prompted for authentication.
How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP 10.0.1.10 to the destination http://www.fortinet.com? (Choose two.)
- A. If a Google Chrome browser is used with User-B credentials, the HTTP request will be allowed.
- B. If a Mozilla Firefox browser is used with User-B credentials, the HTTP request will be allowed.
- C. If a Microsoft Internet Explorer browser is used with User-B credentials, the HTTP request will be allowed.
- D. If a Mozilla Firefox browser is used with User-A credentials, the HTTP request will be allowed.
Answer: A,C
NEW QUESTION 41
An administrator has configured two-factor authentication to strengthen SSL VPN access. Which additional best practice can an administrator implement?
- A. Configure split tunneling in tunnel mode.
- B. Configure different SSL VPN realms.
- C. Configure host check.
- D. Configure Source IP Pools.
Answer: C
NEW QUESTION 42
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?
- A. NetAPI polling can increase bandwidth usage in large networks.
- B. The NetSession Enum function is used to track user logouts.
- C. The collector agent must search security event logs.
- D. The collector agent uses a Windows API to query DCs for user logins.
Answer: B
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD34906
https://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD34906&sliceId=1
NEW QUESTION 43
Which two statements ate true about the Security Fabric rating? (Choose two.)
- A. The Security Fabric rating is a free service that comes bundled with alt FortiGate devices.
- B. Many of the security issues can be fixed immediately by clicking Apply where available.
- C. It provides executive summaries of the four largest areas of security focus.
- D. The Security Fabric rating must be run on the root FortiGate device in the Security Fabric.
Answer: B,D
NEW QUESTION 44
Refer to the web filter raw logs.
Based on the raw logs shown in the exhibit, which statement is correct?
- A. The name of the firewall policy is all_users_web.
- B. Access to the social networking web filter category was explicitly blocked to all users.
- C. Social networking web filter category is configured with the action set to authenticate.
- D. The action on firewall policy ID 1 is set to warning.
Answer: C
NEW QUESTION 45
An administrator must disable RPF check to investigate an issue.
Which method is best suited to disable RPF without affecting features like antivirus and intrusion prevention system?
- A. Disable the RPF check at the FortiGate interface level for the source check.
- B. Enable asymmetric routing, so the RPF check will be bypassed.
- C. Enable asymmetric routing at the interface level.
- D. Disable the RPF check at the FortiGate interface level for the reply check.
Answer: A
NEW QUESTION 46
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?
- A. Read/Write permission for Log & Report
- B. CLI diagnostics commands permission
- C. Custom permission for Network
- D. Read/Write permission for Firewall
Answer: B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD50220
NEW QUESTION 47
Refer to the exhibits.
Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the default configuration of high memory usage thresholds. Based on the system performance output, which two statements are correct? (Choose two.)
- A. Administrators can access FortiGate only through the console port.
- B. FortiGate will start sending all files to FortiSandbox for inspection.
- C. FortiGate has entered conserve mode.
- D. Administrators cannot change the configuration.
Answer: C,D
NEW QUESTION 48
Examine the exhibit, which contains a virtual IP and firewall policy configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port2) interface has the IP address 10.0.1.254/24.
The first firewall policy has NAT enabled on the outgoing interface address. The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the Internet traffic coming from a workstation with the IP address 10.0.1.10/24?
- A. 10.200.1.1
- B. 10.200.1.10
- C. Any available IP address in the WAN (port1) subnet 10.200.1.0/24
- D. 10.0.1.254
Answer: B
Explanation:
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-firewall-52/Firewall%20Objects/Virtual%20IPs.htm
NEW QUESTION 49
Refer to the exhibit.
An administrator has configured a performance SLA on FortiGate, which failed to generate any traffic.
Why is FortiGate not sending probes to 4.2.2.2 and 4.2.2.1 servers? (Choose two.)
- A. The Detection Mode setting is not set to Passive.
- B. Administrator didn't configure a gateway for the SD-WAN members, or configured gateway is not valid.
- C. The Enable probe packets
- D. The configured participants are not SD-WAN members.
Answer: B,C
NEW QUESTION 50
Which statements best describe auto discovery VPN (ADVPN). (Choose two.)
- A. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance.
- B. ADVPN is only supported with IKEv2.
- C. It requires the use of dynamic routing protocols so that spokes can learn the routes to other spokes.
- D. Tunnels are negotiated dynamically between spokes.
Answer: C,D
NEW QUESTION 51
Examine this PAC file configuration.
Which of the following statements are true? (Choose two.)
- A. Any web request to the 172.25.120.0/24 subnet is allowed to bypass the proxy.
- B. Any web request fortinet.com is allowed to bypass the proxy.
- C. Browsers can be configured to retrieve this PAC file from the FortiGate.
- D. All requests not made to Fortinet.com or the 172.25.120.0/24 subnet, have to go through altproxy.corp.com: 8060.
Answer: B,C
NEW QUESTION 52
A network administrator has enabled SSL certificate inspection and antivirus on FortiGate. When downloading an EICAR test file through HTTP, FortiGate detects the virus and blocks the file. When downloading the same file through HTTPS, FortiGate does not detect the virus and the file can be downloaded.
What is the reason for the failed virus detection by FortiGate?
- A. SSL/SSH Inspection profile is incorrect
- B. Antivirus definitions are not up to date
- C. Application control is not enabled
- D. Antivirus profile configuration is incorrect
Answer: A
Explanation:
https traffic requires SSL decryption. Check the ssh inspection profile
NEW QUESTION 53
How do you format the FortiGate flash disk?
- A. Select the format boot device option from the BIOS menu.
- B. Load the hardware test (HQIP) image.
- C. Load a debug FortiOS image.
- D. Execute the CLI command execute formatlogdisk.
Answer: A
NEW QUESTION 54
......
Best Value Available! 2022 Realistic Verified Free NSE4_FGT-7.0 Exam Questions: https://examcollection.dumpsvalid.com/NSE4_FGT-7.0-brain-dumps.html