C_IBP_2105 Dumps Updated Jan 01, 2022 Practice Test and 82 unique questions
2022 Latest 100% Exam Passing Ratio - C_IBP_2105 Dumps PDF
C_IBP_2105 Exam Certification Details:
| Languages: | English |
| Duration: | 180 mins |
| Cut Score: | 64% |
| Exam: | 80 questions |
NEW QUESTION 16
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.
What is mandatory to create in your planning area for the setup of reference product(s) to work? Note:
There are 2 correct Answers to this question.
- A. Definition of Actual Sales business meaning for one key figure
- B. Definition of an attribute representing the product description
- C. Definition of an attribute representing the product ID
- D. Planning objects for the new product
Answer: C,D
NEW QUESTION 17
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.
- A. Consensus demand planning
- B. Demand-driven materials requirement planning
- C. Finite resource capacities planning
- D. Rough-cut supply planning
- E. Executive review
Answer: A,D,E
NEW QUESTION 18
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Link two analytics charts.
- B. Organize charts.
- C. Add process templates.
- D. Display all assigned analytics on a single UI.
- E. Rename the charts.
Answer: B,C,D
NEW QUESTION 19
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Reorder point
- B. Target inventory level
- C. Lot sizes
- D. Lead time variability
Answer: C,D
NEW QUESTION 20
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.
- A. The result generates sensed demand data at the monthly time granularity for the full time horizon.
- B. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.
- C. Set up the forecast model to be executed at product-location level.
- D. It is mandatory to load historical lag-based snapshot data.
Answer: B,D
NEW QUESTION 21
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question.
- A. The length of the attribute needs to be 18 digits.
- B. It belongs to a simple or compound master data type.
- C. It should be a non-key attribute of the master data type.
- D. Its data type is INTEGER and its length has been specified.
Answer: B,C
NEW QUESTION 22
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Units of measure are usually not time-independent.
- E. Analytics provide the user with the option to select the target unit of measure.
Answer: A,C,E
NEW QUESTION 23
Analytics charts are created by the user in the Advanced Analytics application. What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question.
- A. Apply filters on your data.
- B. Merge charts together.
- C. Group data.
- D. Open graphics in Excel.
Answer: A,C
NEW QUESTION 24
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. By restricting data input in the Key Figure Configuration app
- B. IBP -> Lock Selected cells in IBP Formatting Sheet tab
- C. Select Protect Active Worksheet in the About section of SAP IBP tab
- D. IBP -> Data Validation in IBP Formatting Sheet tab
Answer: A
NEW QUESTION 25
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Identify inventory items that require closer attention.
- B. Assign more appropriate inventory algorithms to planning objects.
- C. Analyze forecast accuracy by product class.
- D. Tailor your forecast strategy and inventory optimization to segment characteristics.
Answer: C,D
NEW QUESTION 26
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Proportional disaggregation by using KF2 in the expression
- B. Disaggregation according to a user-defined expression
- C. Disaggregation in batch triggered by an application job
- D. Disaggregation according to an equal split
- E. An internal system-generated disaggregation
Answer: A,B,D
NEW QUESTION 27
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Selecting by attribute with option 'contain' is possible.
- B. Specifying source key figure is mandatory.
- C. Specifying target key figure that is time independent is possible.
- D. Specifying target key figure is mandatory.
Answer: B,D
NEW QUESTION 28
Which conditions are prerequisites for key figure disaggregation?
- A. The key figure is stored and editable.
- B. The key figure is calculated and aggregation mode is selected.
- C. The key figure is calculated and editable.
- D. The key figure is set to Not Editable.
Answer: A
NEW QUESTION 29
You are using the Resource Location master data type. How do you specify capacity supply as time- dependent?
- A. Maintain the CAPASUPPLY key figure values in the planning area.
- B. Set the Capacity Supply additional attribute in the time profile.
- C. Set the Capacity Supply Time Series indicator attribute as a key.
- D. Set the Capacity Supply Time Series indicator in the Resource Location master data type.
Answer: D
NEW QUESTION 30
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using aggregation mode average
- B. Using key figure calculation
- C. Using local member
- D. Using attribute as a key figure
Answer: A
NEW QUESTION 31
You create an S&OP operator for heuristics on an SAP IBP project. What must you enable for the S&OP operator that is specifically relevant for subnetworks?
- A. Balance Receipts parameter
- B. Compute Expected Supply parameter
- C. Supply propagation
- D. Normalize Quotas parameter
Answer: B
NEW QUESTION 32
How many different time levels can be selected within one planning view?
- A. All time levels available in the time profile
- B. Only time levels from the base planning level of selected key figures
- C. All time levels available in the time profile, restricted by global configuration parameter
- D. Only base time levels of the planning area
Answer: C
NEW QUESTION 33
What are some of the available ABC segmentation methods in IBP? Note: There are 2 correct Answers to this question.
- A. By Pareto Principle (Sorted and Cumulated %)
- B. By Pareto Principle (Sorted and Calculated Values)
- C. By Number of Items (Sorted Values)
- D. By Number of Items (Sorted Average)
Answer: B,C
NEW QUESTION 34
Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.
- A. Hiding or displaying totals for the key figure
- B. Setting permitted planning levels
- C. Setting disaggregation logic for the key figure
- D. Enabling fixing for the key figure
- E. Enabling planning notes for the key figure
Answer: C,D,E
NEW QUESTION 35
What differentiates the Create New (Simple copy) and the Create New with Dependencies (Advanced copy) functions of a planning area? Note: There are 2 correct Answers to this question.
- A. A copy of the time profile is only created when you use the Create New with Dependencies (Advanced copy) function.
- B. The planning view favorites are only copied when you use the Advanced copy.
- C. Associated attributes are only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- D. Master data is only shared between the original and the new planning area when you use the Create New (Simple copy) function.
Answer: A,D
NEW QUESTION 36
......
SAP C_IBP_2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
SAP C_IBP_2105 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| Planning Operators & Application Jobs > 12% | Use Planning Operators. |
| Supply and Response > 12% | Configure supply planning, run various solvers to generate planning results |
| General Configuration of a Planning Area > 12% | Display, create, copy, edit, check, and activate a planning area. |
| Key Figures & Attributes > 12% | Create and use key figures and attributes. |
| Inventory < 8% | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. |
| User Interface > 12% | Use the Fiori Launchpad to customize the UI, work with Excel UI |
Verified C_IBP_2105 dumps Q&As - 100% Pass from DumpsValid: https://examcollection.dumpsvalid.com/C_IBP_2105-brain-dumps.html