[2023] Earn Quick And Easy Success With HPE6-A78 Dumps [Q34-Q54]

Share

[2023] Earn Quick And Easy Success With HPE6-A78 Dumps

Free HPE6-A78 pdf Files With Updated and Accurate Dumps Training


To pass the HPE6-A78 exam, candidates must demonstrate their ability to configure and troubleshoot Aruba's network security solutions effectively. HPE6-A78 exam consists of 60 multiple-choice questions and must be completed within 90 minutes. The passing score for HPE6-A78 exam is 70%, and candidates who pass the exam will receive the Aruba Certified Network Security Associate certification. Aruba Certified Network Security Associate Exam certification is recognized globally and can significantly improve the candidate's job prospects in the field of network security.


To prepare for the HPE6-A78 exam, candidates can participate in Aruba training courses, attend webinars, and read Aruba product documentation. They can also use third-party study materials such as practice exams, study guides, and online forums. It is essential to have hands-on experience in configuring and managing Aruba network security solutions to pass the exam successfully.

 

NEW QUESTION # 34
You have deployed a new Aruba Mobility Controller (MC) and campus APs (CAPs). One of the WLANs enforces 802.IX authentication lo Aruba ClearPass Policy Manager {CPPM) When you test connecting the client to the WLAN. the test falls You check Aruba ClearPass Access Tracker and cannot find a record of the authentication attempt You ping from the MC to CPPM. and the ping is successful.
What is a good next step for troubleshooting?

  • A. Renew CPPM's RADIUS/EAP certificate
  • B. Check CPPM Event viewer.
  • C. Reset the user credentials
  • D. Check connectivity between CPPM and a backend directory server

Answer: B


NEW QUESTION # 35
Refer to the exhibit.

How can you use the thumbprint?

  • A. install this thumbprint on management stations the stations can then authenticate with the thumbprint instead of admins having to enter usernames and passwords.
  • B. Copy the thumbprint to other Aruba switches to establish a consistent SSH Key for all switches this will enable managers to connect to the switches securely with less effort
  • C. Install this thumbprint on management stations to use as two-factor authentication along with manager usernames and passwords, this will ensure managers connect from valid stations
  • D. When you first connect to the switch with SSH from a management station, make sure that the thumbprint matches to ensure that a man-in-t he-mid die (MITM) attack is not occurring

Answer: D


NEW QUESTION # 36
From which solution can ClearPass Policy Manager (CPPM) receive detailed information about client device type OS and status?

  • A. ClearPass Guest
  • B. ClearPass Onboard
  • C. ClearPass Access Tracker
  • D. ClearPass OnGuard

Answer: D


NEW QUESTION # 37
What is one way that Control Plane Security (CPsec) enhances security for me network?

  • A. It protects management traffic between APs and Mobility Controllers (MCs) from eavesdropping.
  • B. It protects wireless clients' traffic tunneled between APs and Mobility Controllers, from eavesdropping
  • C. It prevents access from unauthorized IP addresses to critical services, such as SSH on Mobility Controllers (MCs).
  • D. It prevents Denial of Service (DoS) attacks against Mobility Controllers' (MCs") control plane.

Answer: B


NEW QUESTION # 38
What distinguishes a Distributed Denial of Service (DDoS) attack from a traditional Denial or service attack (DoS)?

  • A. A DDoS attack originates from external devices, while a DoS attack originates from internal devices
  • B. A DDoS attack is launched from multiple devices, while a DoS attack is launched from a single device
  • C. A DoS attack targets one server, a DDoS attack targets all the clients that use a server
  • D. A DDoS attack targets multiple devices, while a DoS Is designed to Incapacitate only one device

Answer: A


NEW QUESTION # 39
Refer to the exhibit.

You need to ensure that only management stations in subnet 192.168.1.0/24 can access the ArubaOS-Switches' CLI. Web Ul. and REST interfaces The company also wants to let managers use these stations to access other parts of the network What should you do?

  • A. Configure the switch to listen for these protocols on OOBM only.
  • B. Specify 192.168.1.0.255.255.255.0 as authorized IP manager address
  • C. Establish a Control Plane Policing class that selects traffic from 192.168 1.0/24.
  • D. Specify vlan 100 as the management vlan for the switches.

Answer: C


NEW QUESTION # 40
What are some functions of an AruDaOS user role?

  • A. The role determines which authentication methods the user must pass to gain network access
  • B. The role determines which firewall policies and bandwidth contract apply to the clients traffic
  • C. The role determines which control plane ACL rules apply to the client's traffic
  • D. The role determines which wireless networks (SSiDs) a user is permitted to access

Answer: A


NEW QUESTION # 41
What is a benefit or Protected Management Frames (PMF). sometimes called Management Frame Protection (MFP)?

  • A. PMF prevents hackers from capturing the traffic between APs and Mobility Controllers.
  • B. PMF helps to protect APs and MCs from unauthorized management access by hackers.
  • C. PMF protects clients from DoS attacks based on forged de-authentication frames
  • D. PMF ensures trial traffic between APs and Mobility Controllers (MCs) is encrypted.

Answer: B


NEW QUESTION # 42
Which correctly describes a way to deploy certificates to end-user devices?

  • A. ClearPass Onboard can help to deploy certificates to end-user devices, whether or not they are members of a Windows domain
  • B. ClearPass OnGuard can help to deploy certificates to end-user devices, whether or not they are members of a Windows domain
  • C. ClearPass Device Insight can automatically discover end-user devices and deploy the proper certificates to them
  • D. in a Windows domain, domain group policy objects (GPOs) can automatically install computer, but not user certificates

Answer: A


NEW QUESTION # 43
What role does the Aruba ClearPass Device Insight Analyzer play in the Device Insight architecture?

  • A. It resides on-prem and is responsible for running active SNMP and Nmap scans
  • B. It resides on-prem and provides the span port to which traffic is mirrored for deep analytics.
  • C. It resides in the cloud and manages licensing and configuration for Collectors
  • D. It resides In the cloud and applies machine learning and supervised crowdsourcing to metadata sent by Collectors

Answer: D


NEW QUESTION # 44
What is one way a noneypot can be used to launch a man-in-the-middle (MITM) attack to wireless clients?

  • A. it examines wireless clients' probes and broadcasts the SSlDs in the probes, so that wireless clients will connect to it automatically.
  • B. it uses a combination or software and hardware to jam the RF band and prevent the client from connecting to any wireless networks
  • C. it runs an NMap scan on the wireless client to And the clients MAC and IP address. The hacker then connects to another network and spoofs those addresses.
  • D. it uses ARP poisoning to disconnect wireless clients from the legitimate wireless network and force clients to connect to the hacker's wireless network instead.

Answer: D


NEW QUESTION # 45
Which is a correct description of a stage in the Lockheed Martin kill chain?

  • A. In the delivery stage, malware collects valuable data and delivers or exfilltrated it to the hacker.
  • B. In the exploitation and installation phases, malware creates a backdoor into the infected system for the hacker.
  • C. In the weaponization stage, which occurs after malware has been delivered to a system, the malware executes Its function.
  • D. In the reconnaissance stage, the hacker assesses the impact of the attack and how much information was exfilltrated.

Answer: D


NEW QUESTION # 46
What is an example or phishing?

  • A. An attacker lures clients to connect to a software-based AP that is using a legitimate SSID.
  • B. An attacker sends emails posing as a service team member to get users to disclose their passwords.
  • C. An attacker sends TCP messages to many different ports to discover which ports are open.
  • D. An attacker checks a user's password by using trying millions of potential passwords.

Answer: B


NEW QUESTION # 47
You have been instructed to look in the ArubaOS Security Dashboard's client list Your goal is to find clients mat belong to the company and have connected to devices that might belong to hackers Which client fits this description?

  • A. MAC address d8:50:e6 f3;6e;c5; Client Classification Interfering. AP Classification Neighbor
  • B. MAC address d8:50:e6:f3;TO;ab; Client Classification Interfering. AP Classification Rogue
  • C. MAC address d8:50:e6:f3;6e;60; Client Classification Interfering. AP Classification Interfering
  • D. MAC address d8:50:e6:f3;6d;a4; Client Classification Authorized; AP Classification, interfering

Answer: C


NEW QUESTION # 48
What is one difference between EAP-Tunneled Layer security (EAP-TLS) and Protected EAP (PEAP)?

  • A. EAP-TLS creates a TLS tunnel for transmitting user credentials securely while PEAP protects user credentials with TKIP encryption.
  • B. EAP-TLS creates a TLS tunnel for transmitting user credentials, while PEAP authenticates the server and supplicant during a TLS handshake.
  • C. EAP-TLS begins with the establishment of a TLS tunnel, but PEAP does not use a TLS tunnel as part of Its process
  • D. EAP-TLS requires the supplicant to authenticate with a certificate, hut PEAP allows the supplicant to use a username and password.

Answer: D


NEW QUESTION # 49
You are configuring ArubaOS-CX switches to tunnel client traffic to an Aruba Mobility Controller (MC).
What should you do to enhance security for control channel communications between the switches and the MC?

  • A. install certificates on the switches, and make sure that CPsec is enabled on the MC
  • B. Create one UBT zone for control traffic and a second UBT zone for clients.
  • C. Configure a long, random PAPI security key that matches on the switches and the MC.
  • D. Make sure that the UBT client vlan is assigned to the interface on which the switches reach the MC and only that interface.

Answer: A


NEW QUESTION # 50
You are managing an Aruba Mobility Controller (MC). What is a reason for adding a "Log Settings" definition in the ArubaOS Diagnostics > System > Log Settings page?

  • A. Configuring the log facility and log format that the MC will use for forwarding logs to all Syslog servers
  • B. Configuring the MC to generate logs for a particular event category and level, but only for a specific user or AP.
  • C. Configuring the Syslog server settings for the server to which the MC forwards logs for a particular category and level
  • D. Configuring a filter that you can apply to a defined Syslog server in order to filter events by subcategory

Answer: C


NEW QUESTION # 51
What is a correct guideline for the management protocols that you should use on ArubaOS-Switches?

  • A. Disable SSH and use https instead.
  • B. Disable HTTPS and use SSH instead
  • C. Disable Telnet and use SSH instead
  • D. Disable Telnet and use TFTP instead.

Answer: A


NEW QUESTION # 52
You need to deploy an Aruba instant AP where users can physically reach It. What are two recommended options for enhancing security for management access to the AP? (Select two )

  • A. install a CA-signed certificate
  • B. Place a Tamper Evident Label (TELS) over its console port
  • C. Disable the Web Ul.
  • D. Configure WPA3-Enterpnse security on the AP
  • E. Disable Its console ports

Answer: A,B


NEW QUESTION # 53
Refer to the exhibit.

You have set up a RADIUS server on an ArubaOS Mobility Controller (MC) when you created a WLAN named "MyEmployees .You now want to enable the MC to accept change of authorization (CoA) messages from this server for wireless sessions on this WLAN.
What Is a part of the setup on the MC?

  • A. Create a dynamic authorization, or RFC 3576, server with the 10.5.5.5 address and correct shared secret.
  • B. Configure a ClearPass username and password in the MyEmployees AAA profile.
  • C. Enable the dynamic authorization setting in the "clearpass" authentication server settings.
  • D. Install the root CA associated with the 10 5.5.5 server's certificate as a Trusted CA certificate.

Answer: D


NEW QUESTION # 54
......

Real Updated HPE6-A78 Questions Pass Your Exam Easily: https://examcollection.dumpsvalid.com/HPE6-A78-brain-dumps.html