2022 DumpsValid HP HPE6-A81 Dumps and Exam Test Engine
HP HPE6-A81 DUMPS WITH REAL EXAM QUESTIONS
HP HPE6-A81 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 13
Refer to the exhibit.
The users connecting to a wireless SSIO "secure-HS-5007" were being processed by an incorrect 802.1 X service created for VIP access and the user gets deny access. The customer has sent you the screenshot to get your support to resolve the issue What changes will you suggest to fix it?
- A. In the HS_Building 802.1X service, remove the service rule condition with Aruba controller location name and leave it in same position
- B. In the HSBuilding 802. IXservice. change the Authentication method for AMCAuth for VIP access and leave it in same position
- C. Delete the HSBuilding 802 IX service, odd VIP access Aruba-Essid-Name as fourth condition to WSBuilding Aruba 802 1X service
- D. To the HS_Building 802.1 X service, add another service rule condition with VIP access Aruba-Essid-Name and leave it in same position
Answer: A
NEW QUESTION 14
A customer would like to allow only the AD users with the "Manager" title from the "HO" location to Onboard their personal devices. Any other AD users should not be authorized to pass beyond the initial device provisioning page. Which Onboard service will you use to implement this requirement?
- A. Onboard Authorization service
- B. Onboard Pre-Auth service
- C. Onboard Provisioning service
- D. Onboard CP login service
Answer: D
NEW QUESTION 15
Which using Allow All MAC AUTH, which authentication source should be mapped to the service?
- A. Endpoint Database
- B. Any Authentication source
- C. Guest Device Database
- D. Static Host List
Answer: D
NEW QUESTION 16
What is used to validate the EAP Certificate? (Select two.)
- A. Common Name
- B. SAN entries
- C. Server Identity
- D. Key usage
- E. Date
Answer: B,D
NEW QUESTION 17
A customer has two different geographical sites deployed with two ClearPass servers in each site. Site A has the Publisher (CPPM1) and a subscriber (CPPM2) and Site B has two subscribers (CPPM3 S CPPM4) All wired and wireless authentication requests from the respective sites are handled by respective CPPMs deployed in the sites When both the CPPM servers in Site B are lost, the authentications from Site B is handled by Site A subscriber (CPPM2). To control the Multi-Master Cache flush and reduce the amount of inter-site traffic, the customer also created a new Policy Manager Zone (Zone1) The Site B CPPM3 & CPPM4 are part of Zone! and Site A CPPM2 is also mapped to Zone1 as it will act as the backup RADIUS server for Site B The corporate laptops are installed with Persistent agent to run the OnGuard check and the OnGuard settings are also mapped to the Zones The Site A corporate user subnets are mapped to default zone and the Site 6 corporate user subnets are mapped to Zone1. The customer has the following issue in the setup: The corporate clients from Site A authenticating against the CPPM2 as their Primary RADIUS server assigns Quarantine enforcement profile even though the user s health status is Healthy.
What is the cause of this issue?
- A. Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the OnGuard system health validation information is sent to one of the nodes that is part of its home zone only. As the CPPM2 is also not mapped to the default zone as well as Zone1, CPPM2 fails to apply the enforcement profile based on correct health status.
- B. Multi-master cache also contains the roles and posture of the associated and unassociated clients and is shared with all members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the system health validation information is sent to one of the nodes that are part of its home zone As Posture cache for Site A hi not available with CPPMZ. it fails to apply the enforcement profile based on correct health status.
- C. Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the system health validation information is sent to one of the nodes that are part of its home zone only As the OnGuard setting of the Site A corporate user subset is not mapped with default as well as Zone1. CPPM2 fails to apply the enforcement profile based on correct health status.
- D. Multi-master cache also contains the roles and posture of the connected clients and is shared only with the members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the OnGuard system health validation information is sent to one of the nodes that are part of its home zone only. As Posture cache for Site A is not available with CPPM2. it fails to apply the enforcement profile based on correct health status.
Answer: C
NEW QUESTION 18
A Customer has these requirements:
* 2.000 loT endpoints that use MAC authentication
* 6.000 endpoints using a mix of username/password and certificate (Corporate/BYOD) based authentication
* 1.000 guest endpoints at peak usage that use guest self-registration
* 1500 BYOD devices estimated as 3 devices per User (500 users)
* 2.500 endpoints that have OnGuard installed and connect on a daily basis What licenses should be installed to meet customer requirements?
- A. 11.500 Access. 1.500 Onboard. 2.500 OnGuard
- B. 13.000 Access. 1.500 Onboard. 2.500 OnGuard
- C. 11.500 Access. 500 Onboard. 2.500 OnGuard
- D. 9.000 Access. 500 Onboard. 2.500 OnGuard
Answer: A
NEW QUESTION 19
A corporate Clear Pass Cluster with two servers located at a single site, has both Management and Data port IP addresses configured. The Management port IPs art in the DataCenter networks subnet, while the Data port IPs are in the DMZ. What is the difference between using one Virtual IP for the AAA traffic versus sending AAA requests to the physical IPs for each server' (Select two.)
- A. The Individual IPs can provide failover and load balancing.
- B. One Virtual IP can be used together with the individual server IPs for load balancing.
- C. The failover can be accomplished only by using Virtual IP
- D. Using the one Virtual IP can provide failover.
- E. By using the Virtual IP, the failover wait time is faster than using individual server IPs.
Answer: D,E
NEW QUESTION 20
Which statements art true about Aruba down loadable user roles? (select three)
- A. Administering downloadable user roles can be difficult for a large enterprise.
- B. Aruba downloadable user role is a built in enforcement template in ClearPass.
- C. Downloadable role names must be defined in Aruba switch or controller.
- D. Can be applied only on ports or WLAN users authenticated by ClearPass.
- E. Aruba downloadable user role are universally available across the environment.
- F. Can use these result for other authentication methods not involving ClearPass.
Answer: C,D,F
NEW QUESTION 21
There is an Aruba Controller configured to stand Guest AAA requests to ClearPass If the customer would likt tht most effective way to ensure the lowest license usage counts, how should the controller be configured?
- A. Aruba Controller will send stop messages if RADIUS Accounting Server Group is defined in the authentication profile.
- B. Aruba Controller will send stop messages only if both accounting and Interim accounting are enabled.
- C. Aruba Controller will send stop messages only if EAP termination and Interim accounting are enabled.
- D. Configure EAP Termination on the Aruba Controller and the client will send a stop message.
Answer: A
NEW QUESTION 22
Refer to the exhibit.
Your customer has configured the 802.1 X service enforcement conditions with the Endpoint profiling dat a. When the client connects to the network. ClearPass successfully profiles the client but the client always receives an incorrect enforcement profile The configurations in the Aruba controller are completed correctly What is the cause of the issue?
- A. An additional authorization source should be configured for profiling to work.
- B. The enforcement policy conditions configured with profiling data are not correct
- C. The enforcement policy rules evaluation algorithm is not configured correctly.
- D. The option, use cached roles and posture from previous sessions should be enabled.
Answer: D
NEW QUESTION 23
Refer to the exhibit.
What enforcement prof lit will be assigned to the Windows 10 MDH enabled devices if it completes user authentication and is already profiled by ClearPess?
- A. Cisco Redirect URL - Service Unavailable
- B. Cisco Full Access VLAN
- C. Default - Deny Access Profile
- D. Cisco Redirect ACL for profiling
Answer: C
NEW QUESTION 24
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?
- A. The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.
- B. The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.
- C. The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue
- D. The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.
Answer: A
NEW QUESTION 25
Refer to the exhibit.
A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'
- A. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.
- B. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).
- C. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
- D. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
Answer: A
NEW QUESTION 26
While configuring the service rule conditions which NAS-Port-Type value should be used to differentiate the service for wired and wireless authentication?
- A. Ethernet (15) and Wireless-802 II (19)
- B. Ethernet (5) and Wireless-802 11 (9)
- C. Ethernet (O)and W.reless-802 11 (1)
- D. Ethernet (19) and Wireless-802 11(18)
Answer: B
NEW QUESTION 27
The customer would like to add a default common self-registration sponsor email under the initial value on all the ten self-registration pages created for different locations except for the guest registration page created for Sunnyvale location to use a different sponsor email in initial value. Under self-registration form fields, you have "Edit" and "Edit Base Field" Which edit options will you choose to make minimal configuration changes to implement the customer's requirement? (Select two)
- A. Update the specific sponsor email by clicking on the "Edit" option of the sponsor_email form filed on the Sunnyvale self-registration register form page
- B. Update the common sponsor email by clicking the "Edit" option of the sponsor email form field on the one of the self-registration register form page
- C. Update the common sponsor email by clicking the "Edit Base Field" option of the sponsor_email form field on the one of the self-registration form page
- D. Update the specific sponsor email by clicking on "Edit Base Field" option of the sponsor_email form filed on the Sunnyvale location register form page
- E. Update the sponsor email by clicking on both "Edit" and "Edit Base Field" options of the sponsor_email filed on the Sunnyvale register page
Answer: B,E
NEW QUESTION 28
A customer has multiple Aruba Controllers integrated with ClearPass for guest access using a controller-initialed login method. The customer is aware that a public CA-signed captive portal certificate is required in Aruba controllers for controller-initiated workflows. The customer has purchased unique public CA-signed server certificates for each controller.
What configuration steps would you suggest to the customer to complete the deployment? (Select three.)
- A. From the Aruba controller, enable the option "Add switch IP address in the redirection URL" under the respective L3 Authentication profile mapped in the initial role
- B. From the weblogin/ self-registration page Login form settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
- C. Add all the controller IP address and its certificate common names in the DNS server's Forward Lookup Zones and Reverse Lookup Zones to resolve queries from client.
- D. From the Aruba controller, enable the option 'Add switch ip address in the redirection URL' under the respective guest AAA profile mapped in the VAP profile.
- E. From the weblogin/ self-registration page NAS Vendor settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
- F. Edit the HTML header in the weblogin/ self-registration register page with a script to match the controllers IP and captive portal certificate CN names respectively.
Answer: B,D,E
NEW QUESTION 29
A customer is troubleshooting a user that has complained about randomly having issues connecting the network with EAP PEAP using the Corporate Laptop. The initial checks are showing a number of authentication failures but no sign of issues with the ClearPass server or AD.
What can the Customer do to monitor this user Authentication trend closely over the next few days?
- A. configure an Alert using Failed Authentication template with Threshold 1. Interval 5 mins
- B. add to ClearPass Insight Dashboard the Authentication Status widget for this specific user
- C. configure a Report using Radius Failed Authentication template and schedule it to run every 5 mins
- D. add the user name in the Insight/Alert/Watchlitst and get the authentication failures notifications within 30 seconds
Answer: D
NEW QUESTION 30
Refer to the exhibit.
What enforcement profile will be assigned to a client who has successfully completed the user and machine authentication with UNKNOWN posture token?
- A. Redirect to Aruba Quarantine Profile
- B. Deny Access Profile
- C. Redirect to Aruba OnBoard Portal
- D. Redirect to Aruba Dissolvable_page Profile
Answer: D
NEW QUESTION 31
......
2022 New DumpsValid HPE6-A81 PDF Recently Updated Questions: https://examcollection.dumpsvalid.com/HPE6-A81-brain-dumps.html